Journals Overview
| Name | Title | Journal | Year |
| Dr. Kadirvel A | Evaluation of welding procedures to optimize the corrosion performance of AISI 304L pipes | Materials Today Proceedings | July 2023 |
| Mr. Mohanrajhu N | Study of microstructural, chemical and microhardness characterization of stainless steels | Materials Today Proceedings | July 2023 |
| Mr. Mohanrajhu N | Experimental Investigation on Metallurgical and Mechanical Properties and Wear Behavior of Al5032/SiC Nanocomposites | Materials research | July 2023 |
| Dr.M.Mudhu Krishnan | Emission study on a direct injection diesel engine powered with blends of Moringa oleifera biodiesel-diesel | Environmental Quality Management | August 2023 |
| Mr. Mohanrajhu N | Friction welding process with SFPC consumable pin applied on stainless steel duplex SAF 2205 | Materials Today Proceedings | August 2023 |
| Dr. Kadirvel A | Ni addition results in the formation of a bulk metallic glass matrix composite based on ductile Cu | AIP Conference proceedings | September 2023 |
| Dr.M.Mudhu Krishnan | Study on the wear properties of Al5083 metal matrix composite using boron. | Materials Today Proceedings | September 2023 |
| Dr.M.Mudhu Krishnan | Emission study on a direct injection diesel engine powered with blends of Moringa oleifera biodiesel-diesel | Environmental Quality Management | September 2023 |
| Dr. Senthil Kumar K R | Experimental study on the effects of modification with nanoclay on the properties of an SMA mixture | Materials Today Proceedings | OCT 2023 |
| Dr. Kadirvel A | Mitigation of Attacks via Improved Network Security in IoT Network using Machine Learning | International Journal on Recent and Innovation Trends in Computing and Communication | OCT 2023 |
| Dr.M.Mudhu Krishnan | Influence of fibers in hybrid polymer composites fabricated by hand lay-up method | AIP Conf. Proc. | DEC 2023 |
| Mr. Rajesh S | Detection of sludge in critical region of oil transportation pipelines using robot | AIP Conf. Proc. | DEC 2023 |
| Dr.S.D.Sekar | Performance analysis of thin layer drying of okra (abelmoschus esculentus) | AIP Conf. Proc. | DEC 2023 |
| Dr.S.D.Sekar | Mathematical modeling of thin layer drying characteristics of Okra (Abelmoschus Esculentus) | AIP Conf. Proc. | DEC 2023 |
| Mr.N.Mohanrajhu | PERFORMANCE INVESTIGATION OF SINGLE-SLOPE SOLAR STILLS WITH DRIPPING ARRANGEMENT AND NANO ZrO2 PARTICLES | Thermal Science | DEC 2023 |
| Dr.R.Sureshkumar | Using a Smart Wearable Devices Monitoring the Social Distance in Smart Cities | IEEE Xplore | JAN 2024 |
| Mr.K.Sengottaiyan | An Artificial Industrial Intelligence Based Model for Efficient Scheduling to Perform Manufacturing and Execution of Commercial Machines Using Industry 4.0 | IEEE Xplore | JAN 2024 |
| Dr.A.Kadirvel | Industry 5.0 based on Hybrid and Nonlinear Systems in Robustness | International Journal of Intelligent Systems And Applications in Engineering | FEB 2024 |
| Mr.S.Rajesh | Solar Radiation forecast ultilizing an Artificial Neural network model with three distinct learning Algorithms | SAE Mobilus | FEB 2024 |
| Dr.R.Sureshkumar | Enhancing the Performance of Evacuated Tube Heat Pipe Solar Collector Using CuO Nanofluid | Journal of Polymer & Composites | MAR 2024 |
| Name | Title | Journal | Year |
| Sambath S | Synthesis of microcrystalline cellulose from abaca non fluorescent flower pistil and its twill weaved fiber- polyester composites: Viscoelastic, fatigue, and mechanical properties | Polymer Composites | 2023 |
| S. Rajesh | An empirical study of the impacts of parameters in micro electrochemical drilling of Al 7075 alloy composites with SiC and fly-ash | Materials Today: Proceedings | 2023 |
| Suresh Kumar R | A Review on the Performance of Oscillating Heat Pipe used in Battery Cooling | Environmental Quality Management | 2023 |
| Sambath S | Impact of an Unsymmetrical Fault on the Controller of the DFIG Wind Farm | INDIAN JOURNAL OF SCIENCE AND TECHNOLOGY | 2023 |
| Jayabalan C | Taguchi-Based Artificial Neural Network Modeling of Friction Process on Aluminum Alloy Reinforced with SiC Nanoparticles | Hindawi Journal of Nanomaterials | 2023 |
| Duraimurugan P | Subsequent alkali‐silane treated cellulose‐free veld grape fber and Ziziphus jujuba microparticle epoxy composite: characterization study | Biomass Conversion and Biorefnery | 2023 |
| Senthil Kumar K R | Design and Fabrication of Multi functioned Seed Sowing Machine | IEEE Xplore | 2023 |
| Senthil Kumar K R | Machine Learning Designed identification on cervical cancers in patient | IEEE Xplore. | 2023 |
| Lokesh Kumar P J | Investigation on the distribution and role of intermetallic aggregates in influencing the mechanical strength of the friction stir welded AZ91C Mg – AA6061 Al alloy joints | Materials Research Express | 2023 |
| Suresh Kumar R | Study of Microstructure and Wear Resistance of AA5052/B4C Nanocomposites as a Function of Volume Fraction Reinforcement to Particle Size Ratio by ANN | Hindawi Journal of Chemistry | 2023 |
| Sekar S D | Optimization of Activated Carbon Fiber Preparation from Hemp Fiber through Dipotassium Hydrogen Phosphate for Application of Thermal Storage System | Hindawi Adsorption Science & Technology | 2023 |
| Sekar S D | Effect of silane‐treated nanosilica on the grape seed oil‐blended epoxy nanocomposite coating and its characterization | Biomass Conversion and Biorefnery | 2023 |
| RAJESH S | Design of Automatic Headlamp Control Using Light-Dependent Resistor Sensors and Night Vision Camera | Lecture Notes in Networks and Systems | 2023 |
| Sekar S D | Influence of Water Absorption on Physical Characteristics of Cotton Fiber Reinforced Polyester Composites | AIP Conference Proceedings | 2023 |
| RAJESH S | Electrical discharge Machining process variable assessment on Al 7075 mixed composite materials utilizing multi-criteria optimization method | Materials Today: Proceedings | 2022 |
| DURAIMURUGAN P | Synthesis and characterization of cardanol oil and cassava tuber peel biochar toughened epoxy composite coating for structural application | Biomass Conv. Bioref. – Springer | 2022 |
| KADIRVEL A | Effect of Nanomaterials on Tribological and Mechanical Properties of Polymer Nanocomposite Materials | The Influence of Bio, Physical, and Mechanical Attrition in Tribology | 2022 |
| JAYABALAN C | A Novel Manufacturing Process for Nano silica Carbide Reinforced Al2024 Matrix Composites | The Electrochemical Society – IOP conference series | 2022 |
| LOKESH KUMAR P J | Optimization of Parameters to Improve Effectiveness of Plate and Fin Heat Exchangers using Taguchi Method and CFD Analysis. | International Journal of Vehicle Structures & Systems (IJVSS) | 2022 |
| MAHENDRAN G | Comparison of SOH Prediction ML Technique for Electric Vehicles | IEEE Xplore | 2022 |
| SURESHKUMAR R | Review on the performance of Oscillating Heat pipe used in Battery cooling | Environmental Quality Management | 2022 |
| SEKAR S D | Effect of Silane-treated Nanosilica on the Grape Seed Oil-blended Epoxy Nanocomposite Coating and its Characterization | Biomass Conversion and Biorefinery | 2022 |
| SEKAR S D | Jute Fiber IPN Graphite Filled: An Experimental Investigation and Prediction of Wear Behavior | Recent Advances in Materials and Modern Manufacturing | 2022 |
| SAMBATH S | Experimental Analysis in Mechanical Properties of Natural Hybrid Composite | Mathematical Statistician and Engineering Applications | 2022 |
| KADIRVEL A | Experimental Wear Analysis of Al 7090 Alloy Reinforced with Zirconium Oxide Nanoparticles using Hybrid Machine Learning Algorithms | European Chemical Bulletin | 2022 |
| SURESHKUMAR R | Development of copra dryer incorporated with convective steam turbine | Materials Today Proceedings | 2023 |
| SURESHKUMAR R | Development of Novel Environmental Proficient Hybrid Composites based on Marble Dust and Poultry’s Eggshell | Materials Today Proceedings | 2023 |
| SEKAR S D | Mathematical Modeling of Thin Layer Drying Characterisyics of Turkey Berry | Thermal Science | 2022 |
| SEKAR S D | Influence of Nanoclay Dispersion on Mechanical and Vibration Properties of E- Glass Fiber-Reinforced IPN Composites | Recent Advances in Materials and Modern Manufacturing | 2022 |
| SEKAR S D | Optimization of Activated Carbon Fiber Preparation from Hemp Fiber through Dipotassium Hydrogen Phosphate for Application of Thermal Storage System | Adsorption Science & Technology | 2023 |
| SANKARLAL R L | Optimization of parameters for hardness of brass – AlN composite | Materials Today: Proceedings | 2022 |
| SANKARLAL R L | Micro structure and wear analysis of multi-layer nitride coating deposited on the austenitic steel | Materials Today Proceedings | 2023 |
| MOHANRAJHU N | Performance evaluation of vegetable fueled domestic cooking stove | AIP Proceedings | 2022 |
| MOHANRAJHU N | Influence of water absorption on physical characteristics of cotton fiber reinforced polyester composites | AIP Conference Proceedings | 2023 |
| SENGOTTAIYAN K | Spray characteristics of a Rotating Fuel Injector in a Direct Injection Diesel Engine | Transactions of Famena | 2023 |
| LOKESH KUMAR P J | Surface roughness assessments and comparative study of Inconel 625 and Inconel 718 alloys after micro electrochemical machining | Materials Today: Proceedings | 2022 |
| LOKESH KUMAR P J | An investigation on the influence of torque and R-Ratio on the fatique life of double-lap bolted joint usinf FEM | Materials Today Proceedings | 2023 |
| LOKESH KUMAR P J | Impact of tool rotational speed on the microstructural transitions and tensile properties of the dissimilar AZ80A-Mg – AA6061-Al joints fabricated by friction stir welding | Practical Metallography | 2023 |
| RAJESH S | Electrochemical machining of aluminium 7075 alloy, silicon carbide, and fly ash composites: An experimental investigation of the effects of variables on material removal rate | Materials Today: Proceedings | 2022 |
| RAJESH S | Taguchi-based grey relational study for multiple criterion optimization on process variables for micro Electro-chemical Machining of Inconel Super-alloy | Materials Today: Proceedings | 2022 |
| Name | Title | Journal | Year |
|---|---|---|---|
| Dr. S.D.Sekar | MATHEMATICAL MODELING OF THIN LAYER DRYING CHARACTERISTICS AND PROXIMATE ANALYSIS OF TURKEY BERRY (SOLANUM TORVUM) | Thermal Science | 2022 |
| Mr. S. Rajesh | Electro chemical machining of aluminum 7075 alloy, silicon carbide and fly ash composites: An experimental investigation of the effects of variables on material removal rate | Materials Today: Proceedings | 2022 |
| Mr. Duraimurugan P | A current state of metal additive manufacturing methods: A review | Materials Today: Proceedings | 2021 |
| Dr. S.Sambath | Optimization of a Gas turbine using Regasified liquid Natural Gas | International Journal of Mechanical Engineering | 2021 |
| Dr. S.Sambath | Surface defects detecting Robot Arm using Machine Learning | International Journal of Mechanical Engineering | 2021 |
| Dr.M.Mudhukrishnan, | Design Optimization and Fabrication of Spur Gear From Al7075-SiC- B4C Composites | International Journal of Mechanical Engineering | 2021 |
| Dr. S.D.Sekar | Automated Waste Disposal system using Sludge Vacuum Pump | International Journal of Mechanical Engineering | 2021 |
| Dr. S.D.Sekar | Mechanical behavior of Hybrid composites molding | International Journal of Mechanical Engineering | 2021 |
| Mr. Jayabalan C | Automatic tyre pressure inflation and Bumper system with Jack | International Journal of Mechanical Engineering | 2021 |
| Mr. Sankarlal R L | Design and Analysis of Wheelchair Ramp in Government Buses | International Journal of Mechanical Engineering | 2021 |
| Mr. Sankarlal R L | Design of a Piezoelectric Wheel for Power Generation in Automobiles | International Journal of Mechanical Engineering | 2021 |
| Mr. K. Muralidharan | Trolley Encompassed Pesticide Sprayer | International Journal of Mechanical Engineering | 2021 |
| Mr. Partheeban K, | Design and Development of Formula Student Electric Drivetrain | International Journal of Mechanical Engineering | 2021 |
| Mr. P. Ramesh | COMPARATIVE ANALYSIS OF INCREASING EFFICIENCY IN ZIRCONIA COATED PISTON | Pensee International Journal | 2021 |
| Dr.R. Suresh kumar | A review on performance of Nanofluids in various heat pipe solar collector Experimentation of convective steam turbine powered copra dryer | Proc IMechE Part E: J Process Mechanical Engineering | 2021 |
| Mr. Sankarlal R L | Design aspects in the Fabrication of an All-Terrain Vehicle | Pensee International Journal | 2021 |
| Dr. S.D.Sekar | Modern concepts and application of soft robotics in 4D printing | Journal of Physics: Conference Series | 2021 |
| Mr. Sankarlal R L | Fabrication & Testing of Sisal Fibre Reinforced Composite Materials | Pensee International Journal | 2021 |
| Mr. K. Muralidharan | Experimental Investigation of Desalination through Evacuated Tube Collector Type Solar Thermal System | International Journal of Advances in Engineering and Management | 2021 |
| Mr. Partheeban K | Designing Electric Cafe Racer Prototype Called Mbret Using Product Development Method | International Journal of Mechanical Engineering | 2021 |
| Mr. MOHANRAJHU N | Experimental Investigation of a Single Slope Passive Solar Still Augmented With a Chimney | International Journal of Advances in Engineering and Management | 2021 |
| Name | Title | Journal | Year |
|---|---|---|---|
| Mr.G.Sivakkumar | Experimental investigation on physical properties of banana/E-glass fiber reinforced hybrid interpenetrating polymer network composites | Materialstoday: Proceedings. | 2021 |
| Mr.S. Rajesh | Mechanical characterization of glass fiber resin reinforced with sugarcane | Materials today: Proceedings. | 2021 |
| Mr. S.D.Sekar | PROCESS STRENGTHENING THROUGH POKA YOKE TECHNIQUES IN ENGINE ASSEMBLY LINE | PENSEE JOURNAL | 2021 |
| Mr.G.Sivakkumar | Vehicle Overload Management System | PENSEE JOURNAL | 2021 |
| Dr. R. Suresh Kumar | Automatic air filling system using Image processing | PENSEE JOURNAL | 2021 |
| P.J. LOKESH KUMAR | PROCESS STRENGTHENING THROUGH POKA YOKE TECHNIQUES IN ENGINE ASSEMBLY LINE | PENSEE JOURNAL | 2021 |
| P.J. LOKESH KUMAR | A Review on Selective Laser Sintering Process | PENSEE JOURNAL | 2021 |
| Ramesh.P | COMPARATIVE ANALYSIS OF INCREASING EFFICIENCY IN ZIRCONIA COATED PISTON | PENSEE JOURNAL | 2021 |
| Mr. S.D.Sekar | Mathematical Modelling of thin layer drying characteristics and proximate analysis of turkey berry (Solanum torvum) | Thermal Science | 2021 |
| Dr. K.R.Senthil Kumar | “A comparative study of spherical and cylindrical shells thermal energy storage systems using paraffin wax-palmitic acid and their eutectic mixture” | International Journal of Ambient Energy | 2021 |
| Dr. M.Mudhu Krishnan | Mathematical Modelling of thin layer drying characteristics and proximate analysis of turkey berry (Solanum torvum) | Thermal Science | 2021 |
| S. RAJESH | PERFORMANCE ANALYSIS ON CYLINDER LINER BY ANSYS WITH DIFFERENT COATING | PENSEE JOURNAL | 2020 |
| Dr.G. MAHENDRAN | REAL-TIME EVALUATION OF AIR AND WATER QUALITY IN URBAN AREAS | “International Journal of Mechanical and Production Engineering Research and Development (IJMPERD)” | 2020 |
| Mr.N.Mohanrajhu | DESIGN OF PORTABLE SEED SOWING MACHINE FOR SMALL FARM APPLICATIONS | International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) | 2020 |
| Mr. N. Mohanrajhu | INTERNATIONAL JOURNAL OF MULTIDISCIPLINARY EDUCATIONAL RESEARCH | PNEUMATIC HOLLOW SHAFT BENDING DEVICE | 2020 |
| Dr. M.Mudhu Krishnan | “Technologies in additive manufacturing for fiber reinforced composite materials: a review” | Current Opinion in Chemical Engineering | 2020 |
| Dr. R. Suresh Kumar | Thermal analysis of two-phase closed thermosyphon (TPCT) using nanoflui | Materials Today: proceedings | 2020 |
| Name | Title | Journal | Year |
|---|---|---|---|
| Mr. S.D.Sekar | Experimental investigation on physical properties of banana/E-glass fiber reinforced hybrid interpenetrating polymer network composites | Materials today: Proceedings. | 2021 |
| S. Sathishkumar, M. Kannan, R.L. Sankarlal | “THERMAL STRESS ANALYSIS OF INTEGRATED COMBUSTION ENGINE PISTON USING CAE TOOLS (ALUMINUM SILICON ALLOY, ALUMINUM SILICON ALLOY STEEL)” | Acta Mechanica Malaysia (AMM) | 2020 |
| R.Suresh kumar,S.Tharves Mohideen,N.Jayanthi,M.Venkatesh | Thermal analysis of two-phase closed thermosyphon (TPCT) using nanofluids | Materials today: Proceedings | 2020 |
| Madhankumar S, Rajesh S, Balamurugan R,Prawin Sankar T A, Shibin Thomas S, Nishar Ahamed B, Muhammad Nayeem M | “DESIGN AND MODELLING OF SELF BALANCING ELECTRIC TWO -WHEELER USING GYROSCOPE” | TEST Engineering & Management | 2020 |
| “K. Rajan , A. Manoj Babu , Ravichandraganesh Paladi , S. Nallusamy & K. R. Senthil Kumar” | “Performance assessment of DI diesel engine using waste transformer oil with different compression ratios” | International Journal of Ambient Energy | 2020 |
| Krishnan Ramachandran Senthil Kumar | Experimental study on diesel engine working characteristics using yellow oleander biodiesel with the effect of different injection timings | Energy Sources, Part A: Recovery, Utilization, and Environmental Effects | 2020 |
| Partheeban K, S Chockalingam | Development of Solar Water Heater using Product Development Approach | TEST Engineering & Management | 2020 |
| P.Ramesh, P.J. Lokesh Kumar | Experimental Investigation on Mechanical and Water Absorption Properties of Kenaf/Glass fiber Hybrid Composites | TEST Engineering & Management | 2020 |
| S.D.Sekar, S.Sekar, K.Partheeban, T.N.Valarmathi | Recent Developments in Renewable Solar Energy based drying Systems: A Review | TEST Engineering & Management | 2020 |
| Dinesh Thiyagarajan,Kadirvel A,Hariharan P | Role of nano-silica in tensile fatigue, fracture toughness and low-velocity impact behaviour of acid-treated pineapple fibre/stainless steel wire mesh-reinforced epoxy hybrid composite | Materials Research Express. | 2020 |
| Kalaiselvam V*, Rajesh S, Sivakkumar G | Analysis of Performance, Combustion and Emission Characteristics of Multi-Cylinder CRDI Engine using Palm Oil Methyl Ester (POME) as a Fuel | TEST Engineering & Management | 2020 |
| T. Dinesh & A. Kadirvel & P. Hariharan | “Thermo-Mechanical and Wear Behaviour of Surface-Treated Pineapple Woven Fibre and Nano-Silica Dispersed Mahua Oil Toughened Epoxy Composite” | Silicon | 2020 |
| Muralidharan K,Suresh Kumar R,Saravanan S | Design and Analysis of Multi Operation Farming Rover | TEST Engineering & Management | 2020 |
| N.Jayanthi,R.Suresh Kumar,GopaluKarunakaran,M.Venkatesh | Experimental investigation on the thermal performance of heat pipe solar collector (HPSC) | Materials today: Proceedings | 2019 |
| Sekar Subramani, Sekar Sivakumar Dana, Valarmathi Thirumalai Natesan, Lionus Leo George Mary | ENERGY AND EXERGY ANALYSIS OF GREENHOUSE DRYING OF IVY GOURD AND TURKEY BERRY | Thermal Science | 2019 |
| Barath M, Rajesh S, Duraimurugan P | Experimental Exploration of Hybrid Metal Matrix Composite using Abrasive Water Jet Machining | International Journal of Engineering and Advanced Technology (IJEAT) | 2019 |
| Mahendran G, Jayabalan C, Palani Subbiah, Sathish kumar R | CATIA V5 ANSYS Based Performance Enhancement on Disc Brake | International Journal of Engineering and Advanced Technology | 2019 |
| Sengottaian K, Mohanrajhu N, Palani S, Jayabalan C | Design of Manure Spreader Machine for agricultural farm field | International Journal of Innovative Technology and Exploring Engineering (IJITEE) | 2019 |
| M.Mudhukrishnan,P.Hariharan,K.Palanikumar | Measurement and analysis of thrust force and delamination in drilling glass fiber reinforced polypropylene composites using different drills | Measurement | 2019 |
| Palani Subbiah, Vijayakumar Dharmaraj,Gomalavalli Ramesh, Jayabalan C | Micro controller based smart helmet by Ir Motion Sensors | International Journal of Engineering and Advanced Technology | 2019 |
| Palani Subbiah,Jayabalan C, Logesh M, Gomalavalli Ramesh | Machining Performance Optimization For Minimizing Material Losses By Thickness Variation Method | International Journal of Engineering and Advanced Technology | 2019 |
| Selvam M, Palani S, Logesh M, Ramesh G, Jayabalan | Reducing Down time for Engine Block washing machine | International Journal of Engineering and Advanced Technology | 2019 |
| Palani Subbiah,Jayabalan C, Gomalavalli Ramesh, Selvam M | Development of Pneumatic Shock Absorber by Variable Damping | International Journal of Engineering and Advanced Technology | 2019 |
| M.Mudhukrishnan, P.Hariharan, K.Palanikumar | Delamination Analysis in Drilling of Carbon Fiber Reinforced Polypropylene (CFR-PP) Composite Materials | Materials today: Proceedings. | 2019 |
| P.Ramesh, V.Deepak Balaji , R.Ganesh Kumar , S.Aakash Sundar | Design and Fabrication of Evaporative cooling Air Conditioner in Tractor Cabin | INTERNATIONAL RESEARCH JOURNAL OF MULTIDISCIPLINARY TECHNOVATION (IRJMT) | 2019 |
| K. Partheeban,P. Ramesh,Dr. S. Chockalingam | “Taguchi Optimization of Cutting Parameters for Surface Roughness and Material Removal Rate in Turning Operation” | International Research Journal of Engineering and Technology (IRJET) | 2019 |
| Name | Title | Journal | Year |
|---|---|---|---|
| Mr. P.RAMESH | DESIGN AND ANALYSIS OF CHAIN DRIVE POWER TRANSMISSION FROM STATIONARY TO OSCILLATING DEVICES | International Research Journal of Engineering and Technology (IRJET) | 2019 |
| Name | Title | Journal | Year |
|---|---|---|---|
| Mr.P.J.Lokesh kumar | Computation of linear elastic and elastic plastic fracture mechanics parameters using FEA | International Journal of Engineering and Advanced Technology | 2017 |
| Mr.K.Sengottaiyan | Rotating injector in DI diesel engine for improving performance and reducing NOx emission. | International Journal of Energy and Water Resources | 2017 |
| Mr. P.Ramesh | Finite Element Analysis on Optimized Condition of Super Plastic Forming of AZ31B Magnesium Alloy Sheets | Materials Today Proceedings | 2017 |
| Mr. S.D.Sekar | Recent development in drying of food products | IOP Conference Series: Materials Science and Engineering | 2017 |
| Name | Title | Journal | Year |
|---|---|---|---|
| Mr. C. Jayabalan | Heat Enhanced by an Exothermic Reaction on a fully developed MHD Mixed convection flow in a vertical Channel | Applied Mechanics and Technical Physics | 2016 |
| Dr. V.Siva Kumar | MATLAB modelling and examination of the effect of heat capacity of basin and glass cover on performance of solar still by thermal models | International journal of Ambient Energy | 2016 |
| Dr. V.Siva Kumar | Assessment of convective heat transfer coefficient and mass of water evaporated from a single-slope passive solar still by different thermal models: an experimental validation | International journal of Ambient Energy | 2016 |
| Dr.K.Chandrasekaran | Significance of Energy Absorbing Layer in GFRP Composite on Flexural Response | Journal of Testing and Evaluation | 2016 |
| Mr. S.D Sekar | Recent developments in solar energy- based absorption cooling systems | Progress in Industrial Ecology, an International Journal | 2016 |
| Name | Title | Journal | Year |
|---|---|---|---|
| Mr.MUDHUKRISHNAN | Tool materials influence on surface roughness and oversize in machining glass fiber reinforced polypropylene (GFR-PP) composites | Materials and manufacturing processes | 2016 |
| Dr. K.R. Senthil Kumar | Effect of piston bowl geometry on the performance of a diesel engine using Corn biodiesel and its diesel blends | International Journal of ChemTech Research | 2016 |
| Mr. S.D Sekar | Optimization and modeling Techniques of Various Dryer � A Review | International Journal of Applied Engineering Research | 2016 |
| Dr.K.Chandrasekaran | Damage Characterization of GFRP Composite on Exposure to Cyclic Loading by Acoustic Emission | FME Transactions | 2016 |
| Dr.K.Chandrasekaran | Significance of cyclic loading parameters on the flexural response of the GFRP composites | Journal of Mechanical Science and Technology | 2016 |
| Dr.R.Suresh kumar | Heat transfer characteristics of nanofluids in heat pipes: A review | Renewable and Sustainable Energy reviews | 2015 |
| Mr. G.Mahendran | Damage Detection in Laminated Composite Plates And Shells Using Second Derivatives of Mode Shape Data Through Dynamic Analysis of These Structures | ASME Digital collections | 2015 |
| Mr.S.D. Sekar | Optimization and Modelling Techniques of Various Dryer- A Review | International Journal of Applied Engineering Research | 2015 |
| Mr.S.D. Sekar | Recent developments in solar energy-based absorption cooling systems | Progress in Industrial Ecology | 2015 |
| Dr.K.Chandrasekaran | Effect of cyclic loading frequency on flexural modulus of GFRP laminates with resin rich intermediate layer | Applied Mechanics and Materials | 2015 |
| Dr.K.Chandrasekaran | Effect of Fibre Volume Fraction on Mechanical Properties of FRTP Laminates produced by Film Stacking Method | Applied Mechanics and Materials | 2015 |
| Mr. G.Mahendran | Damage Detection in Laminated Composite Beams, Plates and Shells using Dynamic Analysis | Applied Mechanics and Materials | 2015 |
| Dr.V.SivaKumar | Effect of heat capacity of basin material and glass cover on distillate yield of single slope passive solar still � A theoretical investigati | Applied Mechanics and Materials | 2015 |
| Dr. K.R. Senthil Kumar | Performance and Emission Characteristics of a Di Diesel Engine Fuelled with Cashew Nut Shell Oil (CNSO)-Diesel Blends with Diethyl Ether as Additive | Applied Mechanics and Materials | 2015 |
| Dr. K.R. Senthil Kumar | Preparation and Characterization Study of Phase Change Materials for Thermal Energy Storage Applications”, Applied Mechanics and Materials | Applied Mechanics and Materials | 2015 |
| Name | Title | Journal | Year |
|---|---|---|---|
| Dr .V.SIVAKUMAR | Effect of heat capacity of basin material and glass cover on distillate yield of single slope passive solar still � A theoretical investigation | Applied Mechanics and Materials | 2015 |
| Mr.V.SivaKumar | Experimental studies on quality of desalinated water derived from single slope passive solar still | Taylor and Francis | 2015 |
| Dr.T.N.Srikantha Dath | Critical success factors & their Impact factor on knowledge Management in medium sized Manufacturing companies | International Journal of Science, Technology and Management | 2015 |
| Mr. G.Mahendran | Damage detection in laminated composite beams, plates and shells using Dynamic Analysis. | Applied Mechanics and Materials | 2015 |
| Mr.M.Mudhukrishnan | Characterization of glass fibre/carbon fibre hybrid thermoplastics composite laminates fabricated by film stacking method | Applied Mechanics and Materials | 2015 |
| Mr.N.Mohanrajhu | Numerical heat transfer and pressure drop studies of turbulent Al2O3 – Ethylene Glycol / Water nanofluid flow in an automotive radiator tube | Applied Mechanics and Materials | 2015 |
| Dr .V.SIVAKUMAR | Effect of heat capacity of basin material and glass cover on distillate yield of single slope passive solar still � A theoretical investigation� | Applied Mechanics and Materials | 2015 |
| Dr .V.SIVAKUMAR | Investigation on the effects of heat capacity on the theoretical analysis of single slope passive solar still | Desalination and Water Treatment | 2015 |
| Dr. K.R. Senthil Kumar | Study on Mechanical Properties of AA6351 Alloy Reinforced with Titanium Di-Boride (TiB2) Composite by�In Situ�Casting Method | Applied Mechanics and Materials | 2015 |
| Mr.V.SivaKumar | Investigation on the effects of heat capacity on the theoretical analysis of single slope passive solar still | Taylor and Francis | 2015 |
| Dr.K.Chandrasekaran | A study on machinability performance of silicon carbide particulate reinforced metal matrix composite | Applied Mechanics and Materials | 2015 |
| Dr.T.N.Srikantha Dath | Influence of Experimental environment on the enhancement of ultra fine grain structure with optimum ductility of equal channel angular pressed copper | Applied Mechanics and Materials | 2015 |
| Dr.T.N.Srikantha Dath | Response of copper to Equal Channel Angular Pressing with different processing temperature | Procedia Engineering | 2015 |
| Dr.K.Chandrasekaran | Vibration Analysis on a Composite beam and Damage Identification using Finite Element Analysis | Journal of Structural Engineering | 2015 |
| Dr .V.SIVAKUMAR | Energy and exergy analysis of single slope passive solar still: an experimental investigation | Desalination and Water Treatment | 2014 |
| Name | Title | Journal | Year |
|---|---|---|---|
| Dr.K.R.Senthil Kumar | Experimental studies on the Performance, Emission and Combustion Characteristics of a Diesel Engines using Cashew Nut Shell Liquid (CNSL)- diesel blends as fuel | International Journal of Applied Environmental Sciences | 2014 |
| Dr. K.R. Senthil Kumar | Experimental analysis of a Diesel Engine fuelled with Biodiesel Blend using Di-ethyl ether as fuel additives | International Journal of Engineering and Technology (IJET | 2014 |
| Dr. K.R. Senthil Kumar | Reduction of Exhaust missions on a Biodiesel fuelled Diesel Engine with the Effect of Oxygenated Additives | Additives International Journal of Engineering and Technology (IJET) | 2014 |
| Dr. A.Kadirvel | Optimization of the die-sinking micro-EDM process for multiple performance characteristics using the Taguchi-based Grey relational analysis. | Materials and Technology | 2014 |
| Dr.R.Sureshkumar | Thermal performance of thermosyphon heat pipe using CuO nanofluids | International Journal of Engineering and Research | 2014 |
| Dr.R.Ganesh | Optimization in Dry Sliding Wear Test of Al 2219 � SiCp Composite Using Taguchi Based Grey Relational Analysis | Applied Mechanics and Materials | 2014 |
| Dr .V.SIVAKUMAR | Improvement techniques of solar still efficiency: A review | Renewable and Sustainable Energy Reviews | 2013 |
